Put One Permit on Several Sites

Save one regulator permit on several neighbours' lake sites at once, with each site's own requested and approved footage, treatment acres and fee.

Weed Treatment

Updated November 17, 2026

Requires the Site Permits feature. If you do not see it, ask your OpsVara contact whether it is enabled for your account.

One regulator permit often covers several neighbours on the same stretch of shore. Instead of typing the permit into each site, save it once: the permit number, dates, status and document are shared, and each site keeps its own footage, treatment acres and fee. When you are done, every site has the permit, and each one shows the others under Also on this permit:.

Before you start

  • Each neighbour is a Lake customer site linked to the same catalog lake. Ponds cannot hold a permit.
  • You are office staff or an admin. Other roles can read permits but cannot save them.
  1. Start a permit

    Go to DirectoriesSite Permits and click New Site Permit (or Add Permit on the list). Pick the lake.

  2. Tick every site on the permit

    The lake's customer sites are listed. Tick each one this permit covers, or click Tick all when it covers them all. Search narrows the list without losing the sites you have already ticked. The bar at the bottom counts them; click Continue. The permit form opens at its top.

  3. Fill in the shared permit

    Under Permit (the same for every site), enter the Permit number (required), Year, Issuing authority, Status, Issue date, Expiry date and any Notes. Under Permit document (optional), click Choose document to attach the regulator's PDF or a photo of the paper permit. It is attached to every site.

  4. Set the fee

    Fee for each site starts at the permit fee from Pricing when every site has the same one. Change it if the permit says otherwise. To waive the fee, tick Waive the permit fee for every site; quotes and invoices then add no permit fee line for these sites.

  5. Fill in each site

    Under Sites on this permit, each site has its own boxes, in the order you fill them in:

    1. Requested lakeshore (ft) and Requested lakeward (ft): what was applied for.
    2. Approved lakeshore (ft) and Approved lakeward (ft): what the permit approved.
    3. Treatment area (acres): fills in from the approved lakeshore and lakeward.
    4. Fee: leave it blank to charge the shared fee, or type an amount for this site only.

    When a site's approved lakeshore or lakeward is lower than its requested number, the site shows Approved less than was asked for with the feet, and its permit is marked that way when you save. There is nothing to tick.

    Boxes start with what the site already has, and a box you leave blank keeps the site's number. Click the X on a site to take it off this permit.

  6. Save

    Check Permit fees beside the button: it adds up what these sites will be charged. Click Save permit on N sites. The first site's permit page opens.

Why the acres fill in

The treated area of a shoreline band is lakeshore × lakeward. Approved lakeshore 50 ft and approved lakeward 100 ft is 5,000 sq ft, or 0.115 acres (43,560 sq ft to the acre). The box reads From the approved footage while it matches. Type over it when the permit states a different area.

A site that already has a permit

A site with a different permit shows Has permit (number). Saving replaces it; the old one moves to Past Seasons. Check that row before you save. The old permit stays readable on the site's permit page under Past Seasons.

Add a neighbour to a permit you already saved

Open the permit from DirectoriesSite Permits and click Add sites to this permit. The lake and the sites already on the permit are ticked; those sites cannot be unticked here. Tick the new neighbours and click Continue. The form is filled in from the permit, so you only enter the new sites' footage. A site already on the permit that has its own fee keeps it as its override.

Change one site later

Open that site's permit page. Treatment dimensions has the same five boxes in the same order: Requested lakeshore (ft), Requested lakeward (ft), Approved lakeshore (ft), Approved lakeward (ft), Treatment area (acres). Click Save permit. Saving the status copies it to the other sites with the same permit number.

When you replace the document from that page, Also attach it to the other sites on this permit is ticked, so the new document goes on every site. Untick it to change this site only.

From the list, Update Permit on a grouped row edits the shared fields once and each site's fee and footage in its own section.

Verify it worked

  • Open any of the sites from DirectoriesSite Permits. Also on this permit: lists the others.
  • Each site's Treatment dimensions show its own footage and acres.
  • View uploaded document ↗ opens the same document on each site.

If something is off

What you seeWhat to check
A site is not in the list to tickIt is not a Lake site, or it is not linked to this catalog lake. Fix it on Edit Site.
Continue opened one site's pageOnly one site was ticked. Go back and tick two or more.
The permit saved, but the document says it did not uploadThe message sits under Permit document (optional). Click Open the permit and upload it there. The file must be a PDF, JPEG, PNG or WebP under 25 MB.
A site's acres did not fill inBoth approved boxes need a number. Type the acres by hand for an area the permit gives in acres only.

Frequently asked questions

How are the treatment acres worked out?

Approved lakeshore feet times approved lakeward feet, divided by 43,560. They fill in as soon as both approved numbers are in, and the box reads From the approved footage. You can type a different number over it; changing the approved footage again works the acres out again.

Where do the requested lakeshore and lakeward go?

On the site, because they are what was applied for, not what the permit says. Edit Site shows them in the Requested row of the Shoreline Band grid. The approved footage is saved on the permit and copied to the site, so jobs use it.

One neighbour pays a different permit fee. How do I charge them?

Leave Fee for each site as the shared price and type that neighbour's amount in their own Fee box. It reads This site only. Every other site is charged the shared fee.

I left a box blank. Did that wipe the site's number?

No. A blank box keeps whatever the site already has. To change a number, type the new one.

A site already had a different permit. What happens to it?

That site's row says Has permit (number). Saving replaces it; the old one moves to Past Seasons. Nothing is lost: open the site's permit page to read it under Past Seasons.

I only ticked one site. Why did a different page open?

With one site ticked, Continue opens that site's own permit page, the same as before multi-site permits existed. Tick two or more to get the shared form.

Related guides