Close Out Open Work From Past Days

Find visits from past days that were never checked out or never started, and mark them completed, cancel them or move them, in bulk, from Office Ops.

Updated November 17, 2026

A visit is open work when it is dated before today and was never closed out. There are two kinds:

  • Left in progress. A technician checked in and never checked out.
  • Never started. The visit is still Scheduled or Scheduled - Delayed for a day that has passed.

Until one is closed out, the site's last-visit date, labor cost and per-visit billing leave it out. The Open Work tab in Office Ops is where a company admin or office manager clears them: mark the ones that happened as completed, cancel the ones that didn't, and move the rest to a new day.

How You Hear About Open Work

  • The Open Work tab in Office Ops shows a red count of every open visit, so you see it from any Office Ops tab. Company admins and office managers have this tab.
  • Needs Attention at the top of Office Ops (the General tab) has a row whenever there is any: the total, how many were left in progress and never started, and the oldest date. Its Close Out button opens the Open Work tab. Other office staff see Open List instead, which opens the same visits on the Jobs list. The row goes away when nothing is open.
  • Open Work Alert tells company admins and office managers by email and in the app. It is on unless you switch it off. Open the row under SettingsAutomationsManagers & Admins to choose How Often (Every weekday or Mondays only), the Send After (Local Time), and whether it goes by Email, In-app notification or both. Nothing is sent on a day with no open work.
  • Daily Exception Digest, if you have it turned on in the same place, includes an Open work from past days section with both counts and a link to the screen. Untick it in the digest's settings to leave it out.
  • Open Visits Reminder is for technicians and is off until you turn it on under SettingsAutomationsJobs. After the send time, each technician who still has visits in progress from today or earlier gets one push notification in the mobile app, so the visit gets checked out the same day.

Close Them Out

  1. Open the screen

    Click the Open Work tab in Office Ops, click Close Out in Needs Attention on the General tab, or follow the link in the Open Work Alert. All three open Office OpsOpen Work.

  2. Pick a tab and narrow the list

    Left In Progress and Never Started each show their count. Under Most Open Work, click a technician's name to show only theirs; click it again to show everyone. Narrow the rows further with Technician, Work Type, Route (when you use saved routes), Dated From and Dated To. Each tab lists the oldest 500; when there are more, the screen says so, and the rest appear as you close these out or filter.

  3. Read what was recorded

    What Was Recorded shows what the technician left on the visit: the check-in time, readings, a signed-off plan, chemical or part lines, photos and ticked tasks. Suggested says Looks completed when the technician checked in and recorded readings, a plan or chemicals, and You decide otherwise. A check-in or a photo alone is not treated as proof the work was done. Nothing is ticked for you.

  4. Tick the rows and choose what happened

    Tick the rows you know the answer to, or the box in the header for every row shown, then choose:

    ButtonUse it whenWhat happens
    Mark CompletedThe work was done.The visit becomes Completed, dated the day it was checked into, or its scheduled day if nobody checked in.
    Complete, Not BilledThe work was done, the contract bills per visit, and you do not want this visit billed. Shown only when the list has such visits.The same, and the visit is recorded as a one-off marked No charge, so no invoice picks it up.
    Cancel JobsThe work did not happen.The visit becomes Cancelled.
    Move To A DateThe work still needs doing. Never Started tab only.The visit keeps its technician and goes back to Scheduled at the start of the day you pick, today or later.
  5. Confirm

    The confirmation says how many visits will change and how many of your selection will be left as they are, with the reason. Confirm, and keep the page open while it works through them a few at a time. Stop After This Batch stops it; visits already changed stay changed. The result lists what was done and links every visit that was skipped.

What closing out does not do

Nothing on this screen messages a customer or creates an invoice. Mark Completed does not check required photos or readings. It does move the site's last-visit date up to the visit's day, count the visit in reports and labor cost at its planned length, and pay a technician who is paid per visit. Move To A Date lets the customer's usual appointment reminder go out for the new day.

Visits a Contract Bills Per Visit

Two kinds of contract charge for each completed visit, and the screen treats them differently.

ContractMark CompletedComplete, Not Billed
Priced per visit, billed monthlyAllowed. Nothing is created now; the visit is added to the contract's next monthly invoice as its own dated line. The row and the confirmation say about how much.The visit is left off every invoice.
Invoices each visit as it is completedNot offered, so one click cannot draft a stack of invoices.The visit is completed and never invoiced. To bill it, complete it from the job.

A contract billed by work cycle is neither: its invoice is for the cycle, so one visit cannot be left off it. Complete those from the job.

Rows That Cannot Be Marked Completed Here

Completing a visit from the office skips the technician's check-out, so anything the check-out would have billed or recorded is refused instead of being guessed at. The row says why under Suggested, and the confirmation counts it as left as it is.

The visitWhy it waits
Is on a contract that invoices each visitCompleting it drafts an invoice. Use Complete, Not Billed, or complete it from the job to bill it.
Is on a contract that invoices by work cycle, or one with no billing schedule setCompleting it can draft the cycle's invoice.
Has chemicals or parts logged, or add-ons tickedThose are billed and counted against stock.
Has a dose or treatment plan the technician signed offThe plan's products are only logged at check-out.
Is a treatment (pond, lake, lawn treatment or a pesticide application)It needs its record of what was applied.
Came from an approved quote, or is a one-off set to billIt can invoice when the work is done.
Carries a Care Schedule taskThe task's next due date would be counted from today.
Is linked to a contract for a different work type, such as a repairIt is invoiced from the job.

Complete these from the job: open it from the Job column and finish the visit there. Visits with nothing recorded on them can be completed from this screen when they have no contract, or their contract is billed by the calendar: a flat monthly plan, a per-visit plan billed monthly, or one invoiced on a set date.

Two more rules apply to every action:

  • A visit checked into in the last 12 hours shows Being worked on now and cannot be ticked.
  • Cancel Jobs skips a visit that is already on an invoice, or that has chemicals, parts or a signed-off plan on it. Move To A Date skips a time the customer booked.

Verify It Worked

The tab counts and the red count on the Open Work tab drop, and the Needs Attention row goes away once both reach zero. Open any visit you changed: its history shows Closed out by the office with your name, what was done, and that no customer message was sent.

If a technician finished a visit in the app while you were working, the result lists it as no longer open and leaves the technician's check-out as it is.

Frequently asked questions

Does closing out a visit message the customer or create an invoice?

It never messages the customer and never creates an invoice. One kind of visit is still billed later, on a contract priced per visit and billed monthly, where a completed visit is added to the next monthly invoice. The confirmation says how many and about how much, and Complete, Not Billed leaves them off. Move To A Date re-arms the customer's usual appointment reminder for the new day.

Why can't I mark a visit Completed here?

Completing it would draft an invoice or lose a record. That covers visits whose contract invoices each visit or each work cycle, visits with chemicals, parts or ticked add-ons, a signed-off dose or treatment plan, treatment visits, quoted jobs and Care Schedule tasks. The row says which one applies. A visit on a contract that invoices each visit can be closed with Complete, Not Billed. Complete the others from the job itself.

What does Complete, Not Billed do?

It completes the visit and records it as a one-off marked No Charge, so no invoice picks it up, now or later. Use it for a visit its contract bills per visit when you do not want it billed. The confirmation shows about how much is being left unbilled. To bill a visit instead, complete it from the job.

What date does a visit get when I mark it Completed?

The day it was checked into, or its scheduled day if nobody checked in. Never today. The site's last-visit date, reports, labor cost and per-visit pay all use that day.

Who can use Close Out Open Work?

Company admins and office managers. Other office roles do not have the Open Work tab; the Needs Attention row on Office Ops → General opens the same visits on the Jobs list instead.

How do I undo a visit I cancelled or completed by mistake?

Open the visit and use Re-Open Job. It goes back to Scheduled.

Why is a row greyed out with "Being worked on now"?

A technician checked into it in the last 12 hours. Nothing can be done to it from this screen until that time has passed, so a visit someone is standing at is never closed from the office.

Related guides